Mossberg 590 / 590A1 1.25" Front Sling Loop & M9 / OKC-3S Bayonet Spacer

Description

This product is a simple fixed 1.25" sling loop that doubles as a spacer for M9 and OKC-3S style Bayonets.
- Many, if not all Mossberg 590 and 590A1 of 20" barrel have a slight problem of having its installed bayonet fit loosely due to the bayonet's support ring not completely engaging the magazine cap. This is why a spacer will assist increasing the contact surface area the bayonet makes with the magazine cap and reduce the wiggle on the bayonet.
- The spacer also features a serrated contact surface with the magazine cap serving as a lock washer that reduce the likeliness of the magazine cap coming off loose during firing.
- The front sling stud that originally comes with the  shotgun is often lost, This spacer provides a sling loop that does not rotate, allowing for a secure front mounting point for a traditional 2-point sling.
- Made from 3D printing with PLA (100% infill) - expect some cosmetically rough finish. The choice of polymer is to prevent marring on the shotgun's finish, and the spacer is made thick enough to withstand most practical use.
Product to be installed between the magazine cap and magazine tube support, with serrated side interlock with the magazine cap.
Product should be of a Drop-In fit, however it may require some fitting with files/sandpaper due to different tolerances between shotguns.
DESIGNED, TESTED, and MADE IN USA